Add Curved Grid, Radius ( Modeling > g r )

Tool summary :

• Locate a point and enter a radius to create a curved grid line.
• A curved grid line can be snapped to for point location using INCM and INCL .
• Unlike straight grid lines, which can be added using Add Grid Line , curved grid lines cannot be opened as views or detailed as erectiion view drawings.
• Although curved grid lines cannot themselves be erection view drawings in the Drawing Editor , they can be depicted on other erection view drawings if you Detail Erection Views and choose to " Annotate erection views ."
• See the step-by-step instructions .

Also see :

VIDEO Add Curved Grid, Radius is used to add grid arcs and a grid circle. (Recorded in SDS2 Detailing , v2015.)

• Curved grid lines (topic)
• Delete View (to delete a curved grid line)
• Grid Lines selection filter (for editing and deleting grid lines)
• Add Curved Grid, 3 Points (another way to add a curved grid line)
• Add Grid Line (to add a straight grid line and an erection view)
• Center of curved grid lines ( Display Options )
• Scale erection view bubbles ( Display Options )

page 1 | contents | file > views/grids > | curved grid lines | e views

---

   Step-by-step instructions :

Add Curved Grid, Radius is used to create curved grid lines . The following instructions assume that you are using a 3-button mouse, that User and Site Options > General > " Point location target " is set to ' Fancy ', and that you use mouse bindings similar to those shown in these illustrations.

	1 . Invoke Add Curved Grid, Radius .
	2 . Place the mouse pointer ( ) so that the point location target snaps to where you want the center point of the curved grid line, then left-click ( Locate ). INCL is the Locate option used in this example.
	3 . On the New Erection View window, you must enter a " View name " and a " Radius " in order for the program to generate a curved grid line. In this example, ' Arc ' is selected, which means you need to locate two points in step 4. If ' Circle ' were selected, a single point located in step 4 would place the grid label. " OK " is pressed to continue.
	4 . A temporary construction circle is drawn on screen. Since ' Arc ' was selected in step 3, " left-click ( Locate ) defines one end of the arc, then left-click ( Locate ) at a second point defines the arc's other end. If ' Circle ' had been selected in step 3, only one point would be located in this step.
	5 . A curved grid line is drawn the " Radius " distance entered in step 3, counterclockwise between the 1st point and 2nd point you located in step 4. A circular grid would have been drawn if ' Circle ' had been selected in step 3.

Note 1: To invoke Add Curved Grid, Radius , you can do any of the following:

Method 1 : Click the Add Curved Grid, Radius icon, which is pictured above. The icon can be taken from the group named ' File -- Views/Grids ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose Edit > Views/Grids > Add Curved Grid, Radius .

Method 3, 4 or 5 : Add Curved Grid, Raidus can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface . The default keyboard shortcut for Add Curved Grid, Radius is g r -- where "r" stands for "radius".

Note 2: Right-click ( Return ) in steps 2 or 4 ends the operation.

bindings , steps 2, 4

Note 3: If in step 3, you typed in the name of a view that already has been created, you get a yes-no warning with the message, "_ already exists. Replace? " Press " Yes " to replace the view that already has that name with the view you are saving. Press " No " to cancel this operation without adding a new grid line.

Note 4: The program draws the curved grid line counterclockwise from the 1st point to the 2nd point you locate in step 4.

page 1 | contents | file > views/grids > | curved grid lines | e views | top