The ABM Qualifiers window ( Modeling )

  • To open this window, on the ABM Report window, press the " ABM Qualifiers " button.

  • ABM Qualifiers should be set before you begin modeling. Careful setup of this window is a time-efficient alternative to manually selecting materials for inclusion in the ABM.
  • The " ABM " check box is automatically checked on member and/or material edit windows for the connection materials , miscellaneous materials or main materials of subsequently added materials that meet the qualifications that are set on this window.
  • If an " ABM " check box is checked for a member main material , you can change its state to unchecked (" ABM ") on its member window or on its material window. Changing the state of a check box on either window automatically changes its state on both windows.
  • The " ABM " check box on a member edit window does not affect that member's connection material or miscellaneous material . It only affect's that member's main material. For a member submaterial that is not main material, the state of the " ABM " check box can only be changed on the material window.
  • Changing settings on this window does not affect members or materials that have already been added to the model. This window is used to qualify materials for the ABM at the time that members are added or at the time that materials are added to members. The window does not retroactively qualify materials that have already been added.
  • If you want all " ABM " check boxes in your current Project to, by default, be unchecked as members and materials are added, simply uncheck all the boxes on this window before you add any members and materials in Modeling . You can still manually check the boxes on selected member or material edit windows.
  • Settings applied to the ABM Qualifiers window are for your current Fabricator . Changing to a different Fabricator may cause different settings to be shown on this window.

Educational resources :

YouTube video: A newly added model was qualified for the ABM per the detault ABM Qualifiers settings. The narrator edits some members and materials to point out pertinent ABM tracking information that can be found on those windows even before the first ABM is actually generated.

page 1 | contents | abm report > press "abm qualifiers" | top

------ Set ABM checkboxes for: ------

Beams: or . For subsequently added members, this sets the default state of the " ABM " check box that is found on edit windows on the Beam Edit window and on the Rolled Section Material window for a beam's main material.


An example of an " ABM " check box that is checked.

When " Member main material " is checked . . .

If " Beams " is checked and certain material types are checked under " When material type is ," then the main materials of beams whose section sizes are those checked material types will automatically have their " ABM " check box checked (turned on) at the time that those members are created. Also, the beams themselves will have their " ABM " check box checked. In other words, beam main material of the specified material type will be qualified for inclusion in the ABM.

For example, if " Beams " and " Wide flange " and " Member main material " are the only items checked on this window, then main materials of subsequently added wide flange beams will have their " ABM " check box checked on both the Beam Edit window and the wide flange main material's Rolled Section Material window.

When " Member connection material " is checked . . .

If " Beams " is checked and " Angle " and " Member connection material " are checked and a beam with clip angle connections is added to the model, each of that beam's clip angles will have its " ABM " check box checked (turned on) at Solids Creation time, when the beam's connections are generated in solids form. You can confirm that a clip angle's " ABM " check box is checked by opening the angle's Rolled Section Material window.

Columns: Same as " Beams ," except that this option applies to columns .

Horizontal Braces: Same as " Beams ," except that this option applies to horizontal braces .

Vertical Braces: Same as " Beams ," except that this option applies to vertical braces .

Misc. Members: Same as " Beams ," except that this option applies to legacy miscellaneous members . Stairs, legacy girts and purlins also fall under this category.

page 1 | contents | abm report > press "abm qualifiers" | top

------ When material type is: ------

Wide flange: or .


If a material whose type is checked on this window is added in the model, that material's " ABM " check box is checked.


When a material whose type are not checked on this window is added, the " ABM " check box is not checked (off).

Example: If " Wide flange " and one or more member types are selected under " Set ABM checkbox for " and " Member main material " are checked, then wide flange members of the type(s) whose boxes are checked will automatically have their edit windows' " ABM " boxes checked (turned on) at the time that those members are created. The " ABM " check boxes on the Rolled Section Material windows for those members' wide flange main materials will also be checked. An " ABM " check box that is checked indicates that the member's main material is qualified to be included in a new or updated ABM.

Report Writer: ABMSelection.AssignPageLineByTypeWideFlange

Channel: or . Same as " Wide flange ," except that this option applies to channel sections.

Example: If " Channel " and " Vertical Braces " and " Member main material " are checked, then channel vertical braces that are subsequently added in the model will have their " ABM " boxes checked on their Vertical Brace Edit windows. The " ABM " boxes will also be checked on the Rolled Section Material windows for those vertical braces' wide flange main materials.

Report Writer: ABMSelection.AssignPageLineByTypeChannel

Angle: or . Same as " Wide flange ," except that this option applies to angle sections.

Example: If " Beams " and " Angle " and " Member connection material " are checked and a beam with clip angle connections is added to the model, each of that beam's clip angles will have its " ABM " check box checked (turned on) at the Solids Creation time, when the beam's connections are generated in solids form. You can confirm that the " ABM " check box is checked by opening the angle's Rolled Section Material window.

Report Writer: ABMSelection.AssignPageLineByTypeAngle

W Tee: or . Same as " Wide flange ,"except that this option applies to W tee sections.

Report Writer: ABMSelection.AssignPageLineByTypeWideFlangeTee

Round HSS (Pipe): or . Same as " Wide flange ," except that this option applies to HSS round sections.

Report Writer: ABMSelection.AssignPageLineByTypePipe

Rectangular / Square HSS (Tube): or . Same as " Wide flange ," except that this option applies to HSS/TS sections.

Report Writer: ABMSelection.AssignPageLineByTypeTube

Flat bar: or . Same as " Wide flange ," except that this option applies to flat bar sections.

Report Writer: ABMSelection.AssignPageLineByTypeFlatBar

Round bar: or . Same as " Wide flange ," except that this option applies to round bar sections.

Report Writer: ABMSelection.AssignPageLineByTypeRoundBar

Square bar: or . Same as " Wide flange ," except that this option applies to square bar sections.

Report Writer: ABMSelection.AssignPageLineByTypeSquareBar

Joist: or . Same as " Wide flange ," except that this option applies to joist material .

Report Writer: ABMSelection.AssignPageLineByTypeJoist

Clevis: or . Same as " Wide flange ," except that this option applies to clevis material.

Report Writer: ABMSelection.AssignPageLineByTypeClevis

Turnbuckle: or . Same as " Wide flange ," except that this option applies to turnbuckles .

Report Writer: ABMSelection.AssignPageLineByTypeTurnbuckle

Plate: or . Same as " Wide flange ," except that this option applies to plate sections.

Thickness:

Report Writer: ABMSelection.AssignPageLineByTypePlate

Checkered plate: or . Same as " Wide flange ," except that this option applies to checkered plate. To get a checkered plate in an SDS2 program, you need to check the box for " Checkered " on the material edit windows for the following types of plates: bent plate , multi-bend plate , multi-sided flat plate , rectangular plate , rolled plate , round plate .

Report Writer: ABMSelection.AssignPageLineByTypeCheckeredPlate

S shape: or . Same as " Wide flange ," except that this option applies to S shape sections.

Report Writer: ABMSelection.AssignPageLineByTypeSFlange

S tee: or . Same as " Wide flange ," except that this option applies to S tee sections.

Report Writer: ABMSelection.AssignPageLineByTypeSTee

Welded plate WF: or . Same as " Wide flange ," except that this option applies to welded plate wide flange sections.

Report Writer: AssignPageLineByTypeWeldedPlateSection

Welded plate box: or . Same as " Wide flange ," except that this option applies to welded plate box sections.

Report Writer: ABMSelection.AssignPageLineByTypeWeldedPlateBox

Cold formed C: or . Same as " Wide flange ," except that this option applies to cold formed channel sections.

Report Writer: ABMSelection.AssignPageLineByTypeColdFormedChannel

Cold formed Z: or . Same as " Wide flange ," except that this option applies to cold formed Z .

Report Writer: ABMSelection.AssignPageLineByTypeColdFormedZ

Grating: or . Same as " Wide flange ," except that this option applies to grating .

Report Writer: ABMSelection.AssignPageLineByTypeGrating

Decking: or . Same as " Wide flange ," except that this option applies to decking .

Report Writer: ABMSelection.AssignPageLineByTypeDecking

Shear stud: or . Same as " Wide flange ," except that this option applies to shear studs .

Report Writer: ABMSelection.AssignPageLineByTypeShearStud

Rebar: or . Same as " Wide flange ," except that this option applies to rebar shape material .

Beaded flat: or . Same as " Wide flange ," except that this option applies to beaded flat sections.

Report Writer: ABMSelection.AssignPageLineByTypeBeadedFlat

page 1 | contents | abm report > press "abm qualifiers" | top

------ Class of material to assign ------

Member main material: or .

  • The member main material of a beam is that beam's " Section size ."
    For a column or brace or rolled section legacy miscellaneous member,
    it is also that member's section size.
  • For a miscellaneous member (legacy) that does not have a " Section size ,"
    the member main material is the material type (round bar or
    rectangular plate or shear stud or etc.) of that miscellaneous member.
  • The material class of main material is " System created main member
    material     " or "User modified main member material ."

If this box is checked ( ) and certain member types are checked under " Set ABM checkboxes for " and certain material types are checked under " When material type is ," the member main materials of subsequently added members that are those types will be automatically qualified for the next ABM that is created or updated.

If the box is not checked ( ), the main materials of newly added members will not be automatically qualified for inclusion in the next ABM file that is created or updated.

Example: On ABM Qualifiers (this window), you check the boxes for " Member main material " and " Beams " and " Columns " and " Wide flange ." When you subsequently add beams and columns, you will find that " ABM " is checked on their edit windows and on their main materials's Rolled Section Material windows.

Report Writer: ABMSelection.AssignPageLineByClassMainMaterial

Member connection material: or .

  • The material class of connection material is " System created connection material " or " User modified connection material ."

If this box is checked ( ), subsequently generated system connection materials can, potentially, be qualified for the next ABM that is created or updated. For example, shear plates, clip angles, channel splice plates, column base plates created by connection design . are considered to be member connection materials. User-added material is NOT considered to be member connection material.

If the box is not checked ( ), member connection material will not be qualified for inclusion in the next ABM that is created or updated.

Example: On ABM Qualifiers (this window), you check the boxes for " Member connection material " and " Angle " and " Beams ," but uncheck the box for " Plate ." You then add a beam with a clip angle connection on one end, an end plate connection on the other end. When you edit the clip angle connection material, you see on the Rolled Section Material window that " ABM " is checked, which means that it is ABM qualified. When you do the same for the end plate connection material, you find on the Rectangular Plate Material window that " ABM " is unchecked.

Report Writer: ABMSelection.AssignPageLineByClassConnectionMaterial

Miscellaneous material: or .

If this box is checked ( ), subsequently generated user-added or user-modified material can, potentially, be qualified for the next ABM that is created or updated.

If the box is not checked ( ), miscellaneous materials will not be qualified for inclusion in the next ABM that is created or updated.

Example: On ABM Qualifiers (this window), you check the boxes for " Miscellaneous material " and " Plate " and " Beams ." You then press F3 > select a beam > check the box for " Plate/Bar " > double-click " Rectangular plate ." After locating 2 points, you see on the Rectangular Plate Material window that " ABM " is checked.

Report Writer: ABMSelection.AssignPageLineByClassMiscellaneousMaterial

page 1 | contents | abm report > press "abm qualifiers" | top

To close this window :

   

"OK" (or the Enter key) closes the ABM Qualifiers window and saves the settings on it to the current Fabricator . To change to a different Fabricator , Home > press "fabname" > double-click the Fabricator you want.

"Cancel" (or the Esc key or the button) closes this window without saving any changes that you have made to it

page 1 | contents | abm report > press "abm qualifiers" | top