Erector: Bolt Sym Combo

Bolt Sym Combo ( Drawing Editor )

Tool summary :

Draws a bolt symbol in combination with optional leader lines and pointers.
On most drawings, Bolt Sym Combo adds objects to a comment layer . If your current drawing is a crane placement drawing , it can add the bolt symbol and its optional leader lines and pointers to any layer.
A Return mouse binding (right-click) lets you to add a leader line without a bolt symbol.
Also, the Pointer mouse binding (left-click) generates an arrowhead only the first time that you click.
A New Head mouse binding ( Shift and left-click) lets you add an additional arrowhead for a forked leader.
See the step-by-step instructions .

Also see :

Drawing Editor (where Bolt Sym Combo is a tool)
Bolt symbols (topic)
Comment layer (on most drawings, you must add objects to this type of layer)
Crane placement drawings (drawing type on which you can add objects to non-comment layers)
Bolt Symbol Input (edit window)
Symbols font (setup)
Symbols font style (setup)
Labels character height (setup)
Labels width/height ratio (setup)
Bolt Sym Add (to add a bolt symbol without a pointer)

Step-by-step instructions :

The following instructions assume that you are using a 3-button mouse, that User and Site Options > General > " Point location target " is set to ' Fancy ' ( ), and that you use mouse bindings similar to those shown in these illustrations. Right-click ( Return ) when you are done.

1 . Invoke Bolt Sym Combo .

2 . Position the mouse pointer ( ) so the target ( ) is where you want the pointer's head, then left-click ( Pointer ).

3 . Middle-click ( Bolt Sym ) instructs Bolt Symbol Combo to put the bolt symbol where the target ( ) is at, and it also opens the Bolt Symbol Input window.

4 . On the Bolt Symbol Input window, enter the settings that you want applied to the bolt symbol, then press " OK ." Note that the " Symbol location " selected in this example is ' Right '.

5 . The bolt symbol and pointer are added to the drawing. Repeat these steps to add another bolt combo, or right-click ( Return ) to end the operation.

Note 1: To invoke Bolt Sym Combo :

Method 1 : Click the Bolt Sym Combo icon. The icon can be taken from the group named ' Objects -- Bolt Symbols ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Bolt Symbols > Bolt Symbol Combo .

Method 3, 4 or 5 : Bolt Sym Combo can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

Note 2: Left-click ( Pointer ) at more than one point creates a bolt symbol with a segmented leader line. An arrowhead is placed at the point location target ( ) the first time that you click .

The mouse bindings that you get in step 2.

This bolt symbol with a segmented leader line was created using left-click ( Pointer ) twice, middle-click ( Bolt Sym ) once.

Note 3: In step 3, doing a right-click ( Return ) instead of a middle-click ( Bolt Sym ) would end the Bolt Sym Combo operation but retain leader lines that you already laid out, thus giving you a pointer and leader lines without a bolt symbol .

The mouse bindings that you get in step 3.

<

This leader line with no bolt symbol was created using left-click ( Pointer ) four times, right-click ( Return ) once.

Note 4: Two different methods can be used to create a bolt symbol with forked leader lines.

Here is a bolt symbol with forked leader lines.

Hold down the Shift key to get a New Head mouse binding.

Method 1 : If all you want is two pointer heads, then after closing the Bolt Symbol Input window ( step 4 ), you can add a second pointer and leader line to the bolt symbol, then right-click ( Return ).

Method 2 : You can add a second leader line before opening the Bolt Symbol Input window by holding down the Shift key to get a New Head mouse binding. Left-click ( New Head ) designates that the point of the arrowhead be placed at the location of the target ( ).

Tip 1: When you are done, you can remove each of the bolt symbol combos you have added (one at a time) using Undo .

Tip 2: As shown here , you can drag a hole symbol, bolt symbol or weld symbol to move the symbol and stretch the pointer that is attached to it. To detach the pointer from the symbol, hold down the Shift key and drag the symbol.

Tip 3: Hold down the Shift key and drag the middle of a pointer to change its curvature .

page 1 | contents | objects > bolt symbols > | objects -- bolt symbols | xxx add | bolt symbols | top

	1 . Invoke Bolt Sym Combo .
	2 . Position the mouse pointer ( ) so the target ( ) is where you want the pointer's head, then left-click ( Pointer ).
	3 . Middle-click ( Bolt Sym ) instructs Bolt Symbol Combo to put the bolt symbol where the target ( ) is at, and it also opens the Bolt Symbol Input window.
	4 . On the Bolt Symbol Input window, enter the settings that you want applied to the bolt symbol, then press " OK ." Note that the " Symbol location " selected in this example is ' Right '.
	5 . The bolt symbol and pointer are added to the drawing. Repeat these steps to add another bolt combo, or right-click ( Return ) to end the operation.