Load Configuration ( Modeling & Drawing Editor ) (' Classic ' only)

• This tool is available when " Modeling layout style " or " Drawing Editor layout style " set to ' Classic '.
• A toolbar configuration , mode configuration and keyboard configuration are all stored together under the same toolbar configuration name.
• The configurations used for Modeling and the Drawing Editor are not interchangeable.
• See the step-by-step instructions .

Also see :

• User and Site Options > Toolbars (to load a configuration automatically)
• Toolbar Configuration (to modify the current configuration)
• Keyboard Shortcut Editor (to modify the current configuration)
• Mode Configuration (to modify the current configuration)
• Delete Toolbar Configurations (to delete a configuration)

page 1 | contents | options > | settings (3d) | settings (2d)

---

   Step-by-step instructions

When you Exit the program you are in ( Modeling or the Drawing Editor ) then return, the toolbar configuration that is loaded by default is the one set under User and Site Options > Toolbars . These instructions describe a procedure for loading a configuration to be used in place of that default configuration.

1 . In Modeling or the Drawing Editor , invoke Load Configuration using any one (1) of the following methods:

Method 1 : Choose Options > Load Configuration .

Method 2 : Click the icon represented above . If the icon is not currently on your toolbar, you can add it using Toolbar Configuration . The icon can be found in group named ' Settings ' ( Modeling ) or ' Settings ' ( Drawing Editor ).

Method 3 : Use a keyboard shortcut .

2 . A section dialog opens. On it is a list of all toolbar configurations that have been saved.

Alternative 1 : Double-click the name of the toolbar configuration you want to load. (Or select it, then press the " OK "). Go to step 3.

Alternative 2 : Press " Cancel " to end the Load Configuration operation without loading the toolbar configuration.

3 . The program loads the configuration. The configuration will remain loaded as long as you remain in Modeling or the Drawing Editor (whichever program you are in).

You can now use any of the icons or keyboard shortcuts or modes that have been set up for the configuration file you have just loaded.

If you want a particular configuration file to be loaded each time you start up Modeling or the Drawing Editor , you need to select that file under User and Site Options > Toolbars .

page 1 | contents | options > | settings (3d) | settings (2d) | top