SitePlan: Modeling Commands

Commands ( Modeling )

This help page lists Modeling commands and their command groups (e.g., File ). The commands become available for you when you select that " Command group " in the Keyboard Shortcut Editor or a similar editor. For example, when you select ' File ' in the Context Menu Editor , commands for Save Area Create RFI and Clear Mode Stack become available to you.
Commands listed on this page can be be added as icons using Toolbar Configuration (classic) or the Ribbon Editor (lightning).
For lightning or classic, the commands can also be added using the Keyboard Shortcut Editor or Context Menu Editor or Mode Configuration .
In the lightning interface, ribbons and keyboard shortcuts and modes and the context menu are configured via Customize Interface .
User and Site Options > General > " Modeling layout style " sets whether the Modeling interface is ' Classic ' or ' Lightning '.

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration

File

Exit (or press the button)

Next Erection View

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

File -- Views/Grids

Add Grid Mode

Add Grid Line g s

Add Curved Grid, 3 Points g p

Add Curved Grid, Radius g r

Open View Ctrl + o

Revert Ctrl + r

Save View As s v

Delete View

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Edit

Review (generic)

Delete

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Edit -- Search

Failed Connections

Connections Below Minimum Setup

Bolt Diameters Changed by System

Non-Square Cut Ends

Connection Design Locks Set

Beam Web Doublers

Shear Loads Below Minimum Setup

Connections Changed by System

Non-AISC Single-Plate Shear Connections

Indeterminate Ends

Plain End Connections

Braces with Different Thickness Gussets

Graphical Connections

Frames to Model Complete

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Launchers

Parametric launchers (classic)

A user-added icon can be placed into this command group from the Launcher Manager , under the " Parametric " tab, by pressing the " Add " button then filling out the requisite information, including a file path to the desired parametric (.py) " Script ."

Report launchers (classic)

Icons under this command group are created from the Launcher Manager , under the " Reports " tab, by pressing the " Add " button then filling out the requisite information, including a file path to the desired Report Writer report " Script ."

Selection launchers (classic)

You can create an icon for this command group using the Launcher Manager , by pressing the " Add " button under the " Modeling selections " tab, then filling out the requisite information, including a file path to the desired Advanced Selection (.sel) " Script ."

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

View

Plan View ( v )

Section View ( Ctrl + s )

Isometric View ( i i )

Reference Elevation

Relative Depth ( r d )

Undo View Change ( u )

Clear View Buffer

Redraw

Display Options ( d d )

Retain View

Previous Retained View

Next Retained View

Show Detail ( s d )

Show Sheet

Depth Check

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

View -- Solids Mode

Solids Mode

Toggle Stick/Solid

Change All to Stick ( Shift + A Shift + S )

Change All to Solid Opaque ( s + a )

Change All to Solid Transparent

Change All to Solid Transparent Main

Stick

Solid Opaque

Solid Transparent

Solid Transparent Main

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

View -- Tiles

Toggle Active Tile (classic -- a decoration)

Set Active Tile

Clear Active Tile

Split Tile Horizontally

Split Tile Vertically

Remove Tile

Single Tile

Two Tiles, Vertical

Two Tiles, Horizontal

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Navigate

Rotate View

Navigate Once

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Navigate--Navigation Mode

Zoom In to Region ( z w )

Zoom Out to Region ( z x )

Rotate Repeat Mode

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Navigate - Surface Mode

Surface Mode

Snap to Surface

Snap to Farside Surface

Snap to Adjacent Surface

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model

Status Display ( Shift + ? )

Status Display Legend

Update Attributes q

Display Center of Mass and Weight

VRML Export

Ruler

Show Detail Dimensions

Clear Detail Dimensions

Add Dimensions ( d a )

Erase All Dimensions

Load Dimensions

Save Dimensions

Manage Reference Models

Manage Point Clouds

Hide Reference Model

Show Reference Model

SDS2 Load Planning IFC Export

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Construction Lines

Construction Line Mode

Construction Line Add ( c a )

Finite Construction Line Add ( a f )

Construction Line Add Grid

Construction Line Add Material ( c z )

Construction Line Edit

Construction Line Edit All

Construction Line Erase

Construction Line Erase All

Construction Line Load

Construction Line Save

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Connection Cube ( new )

Connection Cube Review ( new )

Connection Cube Isolation ( new )

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Construction Circle

Construction Circle Mode

Construction Circle Add

Construction Circle Edit

Construction Circle Edit All

Construction Circle Erase

Construction Circle Erase All

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Member

Member Mode

Member Review

Member Review by Piecemark

Member Review by Number

Select Member by Member Number

Automatically Calculate Member Pins

Hide Members ( m h )

Hide Unselected Members ( m u )

Show Members ( m o )

Show Items Attached to Members

Member Sequence

Member Sequence Mode

Show Member Sequence

Member Isolate

Isolate Member Mode

Isolate Member by Location

Isolate Member by Piecemark

Isolate Member by Number

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Group Member

Group Member Review

Group Member Review by Piecemark

Group Member Properties

Isolate Group Member Mode

Isolate Group Member by Location

Isolate Group Member by Piecemark

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Material

Material Mode

Material Review

Set Material Reference Point

Find Material

Material Properties

Isolate Material Mode

Isolate Material by Location

Isolate Material by Piecemark

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Hole

Hole Mode

Hole Review

Hole - Set Reference Point

Hole Properties

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Bolt

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Weld

Weld Mode

Weld Review

Weld Properties

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Reference Drawing

Reference Drawing Mode

Reference Drawing Add

Reference Drawing Link

Reference Drawing Move

Reference Drawing Erase

Reference Drawings Erase All

Reference Drawing Tools

Refresh Reference Drawings

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Parametric

Approval Tool

Approval Sheet Sorting

Attachment Tool

SDS2 Full Transfer

StruMis Transfer

Universal Rebar Exchange

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Cranes

Show Liftable Members

Check / Assign Member Lift

Check / Assign Load Lift

Check / Assign Multi Lift

Erase Cranes

Erase Crane Placements

Add / Edit Tower Crane Specification

Add / Edit Crawler Crane Specification

Add / Edit Truck Crane Specification

Harvest Polygons

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Model -- Concrete

Concrete Wall System

Progress XML Export

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Locate

In the Ribbon Editor , locators can be added to the Locate contextual page .

Auto (Auto Point)

Point Location Configuration

Angle ( ANGL )

Base Construction Line (BSCL)

Base Member Line (BSMB)

Base Real Line (BSRL)

Center of Screen (CNTR)

Composite

Dx/Dy Offset (DXDY)

Exact Point (EXPT)

Rebar Exact Point (REP)

Free Point (FRPT)

Intersection Construction Line (INCL)

Intersection Cons Line/Member (INCM)

Intersection Cons Line/Real Line (INCR)

Intersection Real Line (INRL)

Intersection Real/Member (INRM)

Mid Point (MDPT)

Perpendicular (PERP)

Tangent to Construction Line (TANC)

Vertex Point (VTPT)

XYZ Coordinate (XYZ)

Polar Point (POLE)

On Line (ONLN)

Toggle Ortho (ORTHO)

Toggle UCS

Set UCS to Current View

Set Location Mode (classic)

Toggle Annotations Point (ANNO)

Reference Drawing

Toggle 45 Degree Construction Lines at Noticed Points

Point Cloud Exact Point (PCEXPT)

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Process

Detail Erection Views

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Reports

Report Writer
Run Report Writer Report ( Home > Reports > Generate Report )
Export Report Writer Report

ABM Report

Bill of Material Report 1 by Detail
Bill of Material Report 1 by Sheet
Bill of Material Report 2 by Detail
Bill of Material Report 2 by Sheet
Bill of Material Report 3 by Detail
Bill of Material Report 3 by Sheet
Bill of Material Plot Order by Detail
Bill of Material Plot Order by Sheet

Check Report
Check Plot

Clash Report

Design Calculations
Print Expanded Calculations
Print Expanded Calculations by Location

Field Bolts For Members
Field Bolts For Members by Sequence
Field Bolts For Members By Zone

Field Bolts For Members by Seq., Select by Sheet
Field Bolts For Members by Zone, Select by Sheet

Field Bolts Point to Point
Field Bolts Point to Point by Sequence
Field Bolts Point to Point by Zone
Field Bolts Point To Point by Sheet

Field Bolt Summary
Field Bolt Summary by Sequence
Field Bolt Summary by Zone
Field Bolt Listing From Sheet BOM
Field Bolt Summary From Sheet BOM

Joist Report

Material Summary, Select by Detail
Material Summary, Select by Sheet
Material Summary by Sequence, Select by Detail
Material Summary by Sequence, Select by Sheet
Material Summary by Zone, Select by Detail
Material Summary by Zone, Select by Sheet

Member Revisions by Member
Members in Member Revisions

Plate Report by Thickness
Plate Report by Hole Size

Sheet Loading Report for Details
Sheet Loading Report for Submaterials

Sheet List, Select by Detail
Sheet List, Select by Sheet

Shop Bolt Report
Shop Bolt Report by Zone
Shop Bolt Report by Sequence
Shop Bolt Summary
Shop Bolt Summary by Zone
Shop Bolt Summary by Sequence
Shop Bolt Listing From Sheet BOM
Shop Bolt Summary From Sheet BOM

Job Standards
Global Standards

Status Report by Detail
Status Report by Sheet
Status Report by Category
Status Report by Proximity

Submaterial Piecemark List
Submaterial Piecemark List, by Sequence
Submaterial Piecemark List, by Zone
Submaterial Piecemark List, Select by Submaterial

Shape File Report
Shape File Comparison Report

Field Bolts by Erection View (?????)

Members on Erection Views (?????)

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Reports -- SDS2 User

These are Report Writer vesions of the same reports that are listed above. You might want to reverse engineer these reports to help you figure out how Report Writer works.

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Reports -- Viewer

These are Report Writer reports that were designed specifically for SDS2 viewer.

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Interface

Plotting

Computer Numerically Controlled

Bill Interchange Format

Import Model

Drawing Conversion

Estimating Production

LaserEdge Drawing Export

Drawing Editor

Project Transfer

Synchro

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Settings

User and Site Options

Toolbar Configuration (classic) (replaced by the Ribbon Editor in lightning)

Keyboard Shortcut Editor (classic) (open using Customize Interface in lightning)

Mode Configuration (classic) (open using Customize Interface in lightning)

Context Menu Editor (classic) (open using Customize Interface in lightning)

Load Configuration (classic)

Save Configuration (classic)

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Settings - Job Settings

A list of commands or icons that let you configure as toolbar items, ribbon icons, keyboard shortcuts, context menu commands and mode commands.
The commands open the same windows that you can open from Home > Projects Settings > Job .

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Settings - Fabricator Settings

A list of commands or icons that let you configure as toolbar items, ribbon icons, keyboard shortcuts, context menu commands and mode commands.
The commands open the same windows that you can open from Home > Projects Settings > Fabricator .

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Settings - Concrete Settings

A list of commands or icons that let you configure as toolbar items, ribbon icons, keyboard shortcuts, context menu commands and mode commands.
The commands open the same windows that you can open from Home > Projects Settings .

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Miscellaneous

Toggle Z-filtering (classic) (available on an as-needed basis in lightning)

Status Display Toggle (classic) (always available in lightning)

Status Configuration (classic) (always available in lightning)

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Decorations (classic -- for Toolbar Configuration )

Many of these "decorations" are built-in features of the lightning interface.

Display job/fabricator

Display current elevation

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

User Modes

User Mode 1

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Selection

Selection Mode (a.k.a. Select Items Mode )

Advanced Selection from File

Set Selection Filter ( s f )

Edit Selection Filter

Selection Filter (classic) (always available in lightning)

Set Selection Filter Expression

Model Tree (classic) (always available in lightning)

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Concrete

Report Template Manager

Report Manager

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top

Toolbox

Toolbox tools are free to users whose support accounts are current. Contact an SDS2 sales representative for more information.
To download an installer for any of these tools, log in at https://sds2.com and search ( ) for "toolbox".
Once you've run an installer for a tool, you can place its icon onto toolbars (classic interface), or onto the ribbon (lightning interface).

Most Toolbox tools are downloaded to the ' Toolbox ' command group. Other Toolbox tools are downloaded to the ' Model - Member ' command group.
Toolbox commands can also be invoked using a keyboard shortcut or the context menu .
Click here to go to the SDS2 Detailing manual and view a list of the toolbox tools that are available. These tools may or may not be applicable to SDS2 Site Planning.

ribbon editor | keyboard shortcut editor | context menu editor | mode configuration | top