" Brace Connection To Gusset " connection design locks

A stem-vertical W tee vertical brace field bolts to its gusset plate per choices made to " Brace Connection To Gusset " locks. Since the brace's " Connection type " is ' Coped flange ', the W tee's flange is cut flush to the side of the web (NS or FS) that the gusset will bolt to. The gusset shop attaches to a beam.

VIDEO In a full-featured SDS2 program, a stem-vertical W tee vertical brace has its " Connection type " set to ' Coped flange ' and its " Side of gusset " set to ' Near side ' then to ' Far side '. (Recorded in SDS2 Detailing , v2016.)

(stem-vertical WT vertical brace, field bolted to gusset, to a beam) (vertical brace " Section size " = W tee) (" Input connection type " = ' Vbrc plate ' or ' User defined ') (" Stem orientation " = ' Vertical ')  (" Connection type " = ' Coped flange ')  (" Stem direction " = ' Down ' or ' Up ') (" Side of gusset " = ' Near side ' or ' Far side ')
" Brace Connection To Gusset " ( hole pattern for field bolts)	Related locks : Gusset One Member Brace Connection To Gusset Wtee Weld Conn2 (alternative to " NS/FS Clip Conn2 ") NS/FS Clip Conn2 (alternative to " Weld Conn2 ")

user defined | vertical brace review

---

Connection design locks :

Locks not on the drawing are marked ( not depicted ).

  Brace Connection To Gusset
(stem-vertical W tee, coped flange, to a beam)

Bolt diameter ( not depicted ):

Hole type ( not depicted ):

Rows:

Distance to 1st hole along brace ( to 1st hole ):

Hole spacing along brace ( row spacing ):

Edge distance along brace ( edge dist ):

Other edge distance along brace ( other edge dist ):

Columns:

Distance to 1st hole perpendicular to brace ( not depicted ):

Hole spacing perpendicular to brace ( column spacing ):

user defined | vertical brace review | top