Exit ( Modeling > )

Tool summary :

  • Closes Modeling . The same can be accomplished by clicking the "x" button at the corner of the Modeling window.
  • Any modifications you have made to Status or Edit Properties settings in the 3D model while in Modeling are saved on the fly. Those changes will be in the 3D model when you start up Modeling again.
  • Best practice is to exit Modeling and exit the Drawing Editor and close Home ( ) before shutting down or restarting your computer.
  • If you want to leave Modeling but are not shutting down, try minimizing Modeling . Later you can restore the Modeling program, including the exact view you were in. You can even run multiple sessions of Modeling at the same time.
  • See the step-by-step instructions .

Also see :

page 1 | contents | file > | modeling (index)

   Step-by-step instructions :

1 . In Modeling , invoke Exit using any one (1) of the following methods:

Method 1 : Click the Exit icon, which is pictured above. The icon can be taken from the group named ' File ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Modeling layout style " for Modeling is ' Classic ', you can use the menu system to choose File > Exit .

Method 3, 4 or 5 : Exit can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface .

Method 6 : Click the button at the upper, right corner of the Modeling window. This can be done in both the Linux and Windows operating systems, and in both the lightning and classic interface.

2 . Modeling closes, and the program loses its memory of any retained views you have created, and of the up-to-twenty view changes that can be Undone .

page 1 | contents | file > | modeling (index | top