Continue Flat HandRail ( Modeling )
Tool summary :
- Continue Flat HandRail is an icon that you can add to a toolbar (classic) or the ribbon in Modeling (lightning). It can be found the command group named ' Model -- Parametric '. For the lightning interface, use Customize Interface to configure the ribbon.
- Also in ' Model - Parametric ', you can find the Handrail Tools icon, which can also be used to launch Continue Flat Handrail .
VIDEO 
A member end ( 
) may need to be selected during a handrail operation such as Continue Flat HandRail . This video shows how to turn on " 
Member ends always displayed " in Display Options . You can select member ends even when they are not displayed, but you may find it easier to select them when they are always displayed.
VIDEO This example of Continue Flat HandRail begins with selecting the spliced member end that the new handrail is to start from and to be spliced to. Points are located counterclockwise from that spliced end. The last segment of handrail terminates with a P-end instead of splicing to another handrail. VIDEO Before using Continue Flat HandRail , the P-end of an existing handrail is changed to a spliced end. Continue Flat HandRail is then used to add handrail from that spliced end to the spliced end of another previously added handrail. VIDEO Continue Flat HandRail is used to add a new handrail between two spliced member ends . The tool reads information such as the "offset" from the previously added handrail that the newly added handrail splices to.
page 1 | contents | handrail (index) | handrail tools