Load Configuration ( Modeling & Drawing Editor ) (' Classic ' only)

• This tool is available when " Modeling layout style " or " Drawing Editor layout style " set to ' Classic '.
• A toolbar configuration , mode configuration and keyboard configuration are all stored together under the same toolbar configuration name.
• The configurations used for Modeling and the Drawing Editor are not interchangeable.
• When you Exit Modeling or the Drawing Editor then return, the toolbar configuration that is loaded by default is the one set under User and Site Options > Toolbars . The instructions on this page describe a procedure for loading a configuration to be used in place of that default configuration.
• See the step-by-step instructions .

Also see :

• User and Site Options > Toolbars (sets default toolbars, keyboard shortcuts and modes)
• Toolbar Configuration (to modify the current configuration)
• Keyboard Shortcut Editor (to modify the current configuration)
• Mode Configuration (to modify the current configuration)
• Delete Toolbar Configurations (to delete a configuration)

page 1 | contents | options > | settings (3d) | settings (2d)

---

  Step-by-step instructions

1 . With " Modeling layout style " or " Drawing Editor layout style " set to ' Classic ', invoke Load Configuration using any one (1) of the following methods:

Method 1 : Choose Settings > Load Configuration .

Method 2 : Click the Load Configuration icon, which is pictured above. If the icon is not currently on your toolbar, you can add it using Toolbar Configuration . The icon can be found in group named ' Settings ' ( Modeling ) or ' Settings ' ( Drawing Editor ).

Method 3 : Use a keyboard shortcut .

2 . A selection dialog opens. On it is a list of all toolbar configurations that have been saved.

Alternative 1 : Double-click the name of the toolbar configuration you want to load. (Or select it, then press the " OK "). Go to step 3.

Alternative 2 : Press " Cancel " to end the Load Configuration operation without loading the toolbar configuration.

3 . Load Configuration loads the configuration. The configuration will remain loaded as long as you remain in Modeling or the Drawing Editor (whichever program you are in).

You can now use any of the icons or keyboard shortcuts or modes that have been set up for the configuration file you have just loaded.

If you want a particular configuration file to be loaded each time you start up Modeling or the Drawing Editor , you need to select that file under User and Site Options > Toolbars .

page 1 | contents | options > | settings (3d) | settings (2d) | top