SitePlan: Ellipse Add Center

Ellipse Add Center ( Drawing Editor )

Tool summary :

Draws an ellipse based on your locating its center then each end of its major axis.
In a drawing that is not a crane placement drawing , you can add objects such as ellipses only to comment layers . In a crane placement drawing, you can add objects to non comment layers as well as comment layers.
If User and Site Options > Drawings > " Always show Circle Edit window " is turned on, the Ellipse Setup window will open after you have located point 3 of the ellipse.
After an ellipse has been added using any tool, the choices made on its edit window set the default pen (color) and line type (dash pattern) for subsequently added ellipses unless you change the Edit Palette or edit that ellipse or another ellipse in the meantime.

Also see :

Drawing Editor (where ellipses can be added)
Circles and ellipses (topc)
Circle Setup window (optionally opens when an ellipse is added)
Exact point of a circle (the ellipse's center)
Always show Circle Edit window ( User and Site Options > Drawings > )
Ellipse Setup (the edit window for an ellipse)
Edit Palette (sets default color and line type)
Layer selection tool (sets default layer for adding ellipse to)
Comment layer (on most drawings, ellipses are automatically added to this type of layer)
Crane placement drawings (drawing type on which you can add ellipses to non-comment layers)

Instructions :

VIDEO

An ellipse is added using Ellipse Add Center . Point 1 locates the center. Point 2 sets the major axis. Point 3 sets the minor axis. (Recorded in SDS2 Detailing , v2018.)

To invoke Ellipse Add Center :

Method 1 : Click the Ellipse Add Center icon. The icon can be taken from the group named ' Objects -- Circles ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Circles > Ellipse Add Center .

Method 3, 4 or 5 : Ellipse Add Center can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

Point 1 of the ellipse is its center.

Point 2 of the ellipse is one end of its major axis. The distance between point 1 and point 2 is the ellipse's " Major axis radius ." Tip: You can type this radius..

Point 3 of the ellipse is one end of its minor axis. The distance between point 1 and point 3 is the ellipse's " Minor axis radius ' "

Optional: If User and Site Options > Drawings > " Always show Circle Edit window " is turned on (checked), the Ellipse Setup window opens when you have located point 3 of the ellipse.

Other tools for adding ellipses :

Tools for ellipses:

Ellipse Add Axis End ( )
Circles Offset (can be used to add ellipses or circles)
Add Elliptical Arc ( )

Tools for adding circles: