Member Revisions by Member (data from 3D model)

Tool summary :

  • Outputs a report that shows the short and long descriptions of each revision applied to each member that you select for inclusion in the report.
  • The Member Revisions by Member report provides the same information that pressing the " History " button for " Short revision description " provides in Member Status Review .
  • Group members , beams, columns, braces, joists, girts, purlins, custom members, miscellaneous members and stairs can be assigned member revisions and can be selected for inclusion in this report.
  • Shown below is a sample page from a Member Revisions by Member .
    C0-1 is a short revision description. Moved grid line B 8 inches is the long description for C0-1. Note that a complete history consisting of two revisions is shown under B_4 revisions .
  • Data in the report explains more details about this example. This page also provides step-by-step instructions .

Also see :

page 1 | contents | home > reports > system reports > revision > | reports >

Data in the report (also see the example ):

Member number: The member number [in brackets] is reported for each member selected for inclusion in the report. Different members with the same member piecemark but different member numbers may have different revision histories.

No revisions found: A revision has not yet been assigned to the member. Revisions are assigned to members in a full-featured SDS2 program , not in Site Planning.

Short revision description: Each " Short revision description " that has ever been assigned to a member is listed underneath that member. The currently assigned description is listed first.

Long revision description: Each " Long Revision Description " that is assigned to a member is listed next to the associated short revision description. The currently assigned description is listed first.

Arrangement: The revision history reported for each member lists the current revision first, the second-assigned revision second, and so on ....

page 1 | contents | home > reports > system reports > revision > | reports > | top

How to output a Member Revisions by Member report :

The Member Revisions by Member provides a history of each " Short revision description " and its associated long member description that has been assigned (in a full-featured SDS2 program ) to the members that you select for inclusion on the report.

1 . Use any one (1) of the following methods to begin output of this report:

Method 1 : Home > Reports > System Reports > Revisions > Member Revisions by Member .

Method 2 : Click the Member Revisions by Member icon. The icon can be taken from the group named ' Reports ' and placed on a toolbar (classic) or the ribbon (lightning). Ribbon configuration is done using Customize Interface .

Method 3 : If " Modeling layout style " or " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Reports > Material Summary > Member Revisions by Member .

2 . A selection dialog opens. On it is a selection list of members in your current Job. Each member is listed by its member number [in brackets] and piecemark .

 [1] C_1
 [2] C_2
 [3] C_3
 [4] C_3
 [5] C_6
 [6] C_7
 
" Hide ... " and " Show All " can be used to adjust which members are available for selection. Press the button under " Destination " to output the report to a device or location other than that which is set by User and Site Options > Output > " Reports ."

Alternative 1 : Select the members (including group members ) you want the report to be based on, then press " OK " to output the report as described in step 3.

Alternative 2 : Press " Cancel " to end this operation without generating the report. Do not continue.

3 . The Member Revisions by Member report is output.

Note: If you output the report to the report viewer (" Screen "), you can now review the report on screen then optionally print it or output it to disk (see report viewer ).

page 1 | contents | home > reports > system reports > revision > | reports > | top