Change All to Stick (for Detail Evus using the ' 
Manual ' method)
Tool summary :
- Sets to stick the drawing style of all members in the view that is currently open during manual erection view detailing.
An erection view drawing with all members drawn in the stick style. - See the step-by-step instructions . Use Next Erection View when you are ready to leave Manual Erection View Detailing or, if there is one, open the next erection view.
Also see :
- Detail Erection Views > select 'Manual' (to start up Manual Erection View Detailing )
- Manual Erection View Detailing (environment in which Change All to Stick is a tool)
- Steel member style (overridden by Manual Erection View Detailing )
- Display 3D main member material (affects erection view detailing)
manual evu detailing steps | manual evu detailing environment | solid > | solids
Step-by-step instructions :
1 . In Manual Erection View Detailing , invoke Change All to Stick using any one (1) of the following methods:
Method 1 : Click the Change All to Stick icon, which is pictured above. The icon can be taken from the group named ' Solids ' and placed on a toolbar (classic) or the ribbon (lightning).
Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose Solids > Change All to Stick .
Method 3, 4 or 5 : Change All to Stick can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode .
2 . ALL members in your current view are displayed in the stick style.
At this point, you may want to hide some members or change some members to other member styles. Use Next Erection View when you are done with your changes.
manual evu detailing steps | manual evu detailing environment | solids > | solids | top