Clip Angle Configurations (topic)
Clip angles can be auto standard , user defined , beam-window-specified or joist-window-specified . Each non welded-welded clip angle configuration must be set individually for five different bolt sizes. For most of these configurations, you can optionally set up clip angle piecemarks ( standard piecemarks ) that will automatically be assigned as the clip angles are designed.
Note: The links on this page for connection specification settings such as ' Heavy ' ' Bolted ' and ' Supported ' take you to the " 
Connection specifications " for beams. Equivalent " Connection specifications " ( new ) are available for joist flush framed clip angles.
| Heavy Gage OSL All-Bolted Clip Angles | |
|
Heavy gage bolted-bolted double clip angles are designed when ' Heavy ', ' Bolted ' (to supported), ' Bolted ' (to supporting), and ' Supported ' (or ' Supporting ') are specified for auto standard , user defined , beam-window-specified or joist-window-specified clip angles. |
| Wide Gage OSL All-Bolted Clip Angles | |
 |
Wide gage bolted-bolted double clip angles are designed when ' Wide Gage ', ' Bolted ' (to supported), ' Bolted ' (to supporting), ' Both ' (sides of supported) and ' Supported ' (or ' Supporting ') are specified. |
| Narrow Gage OSL All-Bolted Clip Angles | |
| Narrow gage bolted-bolted double clip angles are designed when ' Narrow Gage ', ' Bolted ' (to supported), ' Bolted ' (to supporting), ' Both ' (sides of supported), and shop attach to ' Supported ' (or ' Supporting ') are specified. |
|
| Single Clip Angle All-Bolted |
|
| A single bolted-bolted clip angle that shop attaches to the supporting or supported member is designed when ' Narrow Gage ' (or ' Wide Gage '), ' Bolted ' (to supported), ' Bolted ' (to supporting), ' Near Side ' (or ' Far Side ' of web), and shop attach to ' Supported ' (or ' Supporting ') are specified. |
| Welded OSL Bolted/Welded Clip Angles | |
| Bolted-welded double clip angles that weld to the supporting beam or column are designed when ' Narrow Gage ' (or ' Wide Gage '), ' Welded ' (to supporting), ' Bolted ' (to supported), ' Both ' (sides of web), ' Supporting ' (or ' Supported ') are specified for auto standard , user defined or beam-window-specified clip angles. |
|
| Single Clip Angle Welded OSL |
|
| A single bolted/welded clip angle that welds to the supporting beam or column is designed when ' Narrow Gage ', ' Welded ' (to supporting), ' Bolted ' (to supported), ' Near Side ' (or ' Far Side ' of web), and shop attach to ' Supporting ' (or ' Supported ') are specified. |
| Heavy Gage OSL Bolted/Welded Clip Angles | |
| Heavy gage bolted/welded double clip angles that bolt to the supporting member (beam or column) are designed when ' Heavy Gage ', ' Bolted ' (to supporting), ' Welded ' (to supported) and shop attach to ' Supporting ' (or ' Supported ') are specified. |
|
| Wide Gage OSL Bolted/Welded Clip Angles | |
|
Wide gage bolted/welded double clip angles that bolt to the supporting member (beam or column) are designed when ' Wide Gage ', ' Bolted ' (to supporting), ' Welded ' (to supported), ' Both ' (sides of web), and shop attach to ' Supporting ' (or ' Supported ') are specified. |
| Narrow Gage OSL Bolted/Welded Clip Angles | |
| Narrow gage bolted/welded double clip angles that bolt to the supporting beam or column are designed when ' Narow Gage ', ' Bolted ' (to supporting), ' Welded ' (to supported), ' Both ' (sides of web), and shop attach to ' Supporting ' (or ' Supported ') are specified. |
|
| Single Clip Angle Bolted OSL |
|
| A single bolted/welded clip angle that bolts to the supporting member (beam or column) is designed when ' Narrow Gage ', ' Bolted ' (to supporting), ' Welded ' (to supported), ' Near Side ' (or ' Far Side ' of web), and shop attach to ' Supporting ' (or ' Supported ') are specified. |
| All-Welded Attached to Supporting Clip Angles | |
| Welded-welded double clip angles that shop weld to the supporting member (beam or column) are designed when ' Supporting ' (shop attached to), ' Both ' (sides of supported), ' Welded ' (to supported) and ' Welded ' (to supporting) are specified for auto standard , user defined or beam-window-specified clip angles |
|
| All-Welded Attached to Supported Clip Angles | |
| Welded-welded double clip angles that shop weld to the supported beam are designed when ' Supported ' (shop attached to), ' Both ' (sides of supported), ' Welded ' (to supported) and ' Welded ' (to supporting) are specified. |
|
page 1 | contents | home > project settings > piecemarking > | classic | top