Change All to Wire (for Detail Evus using the ' Manual ' method)

Tool summary :

  • Sets to wire the drawing style of all members in the view that is currently open during manual erection view detailing.
  • The option " Show 3D main member material " must have been set to ' Show ' on the Detail Erection Views window for member main material to actually be drawn in the wire member style when the view is detailed.

    		An erection view drawing with all members drawn in the wire style.
  • See the step-by-step instructions . Use Next Erection View when you are ready to leave Manual Erection View Detailing or, if there is one, open the next erection view.

Also see :

manual evu detailing steps | manual evu detailing environment | solid > | solids

   Step-by-step instructions :

1 . In Manual Erection View Detailing , invoke Change All to Wire using any one (1) of the following methods:

Method 1 : Click the Change All to Wire icon, which is pictured above. The icon can be taken from the group named ' Solids ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose Solids > Change All to Wire .

Method 3, 4 or 5 : Change All to Wire can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode .

2 . ALL members in your current view are displayed in the wire style.

At this point, you may want to hide some members or change some members to other member styles. Use Next Erection View when you are done with your changes.

manual evu detailing steps | manual evu detailing environment | solids > | solids | top