Grade Beam Templates: Copy Global to Job ( Utility Functions )


  • Global grade beam templates are stored in the data directory used by your current version of this program. Job grade beam templates are stored in your current Job and can be added to a grade beam in that Job by selecting the " Template " in that member's edit window.
  • However, a member edit window cannot be used to add a global template. So, to use global templates in your current Job, you need to use this utility to copy them to your current Job from the library of global templates.
  • The number or names of global templates currently maintained in the data directory does not change as a result of your using this utility.
  • See the step-by-step instructions .

Also see :

page 1 | contents | home > utilities > utility functions > copy global to job >

Step-by-step instructions :

1 . Start Copy Global Grade Beam Templates to Job using the following method:

Method 1 : Home > Utilities > Utility Functions > Copy Global to Job > Copy Global Grade Beam Templates to Job . If prompted to do so, enter the " Utility Password " that has been set up for your network.

2 . A selection dialog opens. On it is a list of the grade beam templates in the data directory used by your current version of this program.

 GB2-0A
 GB3-4
 GB4-0A

If there are no grade beam templates in the data directory, you will be notified of such, and this operation will end without the selection dialog being opened.

Alternative 1 : Select the names of the templates that you want to to copy to your job, then press the " OK " button at the bottom of this selection dialog. Go to step 3.

Alternative 2 : Press the " Cancel " button to end the Copy Global Grade Beam Templates to Job operation. Do not continue.

3 . One of the following happens:

Possibility 1 : An alert dialog opens if any of the grade beam templates you selected in step 2 reside in your current Job. If you press " Yes " on this dialog, you will overwrite the grade beam templates with those in your template repository. If you press " No " on this dialog, the Copy Global Grade Beam Templates to Job operation ends. Do not continue.

One or more of the selected items already exists.
Do you want to overwrite?
   

Tip: When a grade beam template is overwritten using this utility, you must mark for processing grade beams that are defined by it (for example, by using the Mark for Processing tool) and Process and Create Solids before the copied template will be applied.

Possibility 2 : None of the templates you selected in step 2 reside in your current job. The templates are copied to your job, and the operation ends.

4 . The global templates selected in step 2 continue to exist in the repository for such templates and copies of those templates are now Job grade beam templates . You can now apply such a template to grade beams in your current Job by making it the " Template " selection in the member's edit window.

page 1 | contents | home > utilities > utility functions > copy global to job > | top