Home > Project Settings

Fabricator >

Fabricator Standard Fabricator Connections Clip Angle Settings   Bent Plate Settings   Shear Plate Settings   End Plate Settings   Beam Seat Settings   Joist Connection Settings ( )   Cap Plate Settings   Extended Flange Plate ( )   Gusset Plate Settings   Column Splice Settings   Welded Connection Settings   Preferred Connection Material Sizes >

Fabricator > Standard Fabrication Connections Preferred Connection Material Sizes Preferred Angle Sizes   Preferred WT Sizes   Preferred Flat Bar Sizes   Preferred Plate Sizes

Fabricator Piecemarking All-Bolted Clip Angles > Bolted/Welded Clip Angles > All-Welded Clip Angles > Standard Shear Plates   Standard End Plates   Member and Material Piecemarking   Member Descriptions

Fabricator > Piecemarking All-Bolted Clip Angles Heavy Gage OSL All-Bolted Clip Angles Wide Gage OSL All-Bolted Clip Angles Narrow Gage OSL All-Bolted Clip Angles Single Clip Angles All-Bolted	Fabricator > Piecemarking Bolted/Welded Clip Angles Welded OSL Bolted/Welded Clip Angles Single Clip Angles Welded OSL Heavy Gage OSL Bolted/Welded Clip Angles Wide Gage OSL Bolted/Welded Clip Angles Narrow Gage OSL Bolted/Welded Clip Ang. Single Clip Angles Bolted OSL	Fabricator > Piecemarking All-Welded Clip Angles
All-Welded Attached to Supporting Clip Angles
All-Welded Attached to Supported Clip Angles

Also see: Clip Angle Configurations

Fabricator Sheets and Reports   Bill of Material Layout   Sheet Revisions   Sheet Loading Settings	Fabricator Detailing   Dimension Settings   Detailing Defaults   Drawing Presentation   Non-std Field Bolts on Erection Views   Line Weights   Detail Erection View Defaults   General Presentation   Detail Evu Defaults for Site Planning   Bolt Detailing Settings   Detailing Symbol Settings   Connection Erectability Settings   Galvanizing Settings   Member Detailing Settings   Erection View Member Labels   Member View Defaults   CNC Center Marks   Material View Defaults   Position and Match Marks
Fabricator Concrete Concrete Member & Material Piecemarking Tilt-Up Panel Detail Settings	Fabricator Rebar Drawing Schedules   Rebar Schedule Placements   Rebar Template Manager   Report Manager

page 1 | contents | home > project settings > | top

---

Job >

Job Connection   User Defined Connections   Auto Standard Connections   Base / Cap Plate Schedule	Job Design   Design Settings   Plate Design Settings   Moment Plate Design Settings   Flange Plate Clearances   Weld Design Settings   Seismic Weld Access Holes   Schedule of Min. for Structural Members   Schedule of Min. for Single-Pl Shear Conn   Field Clearances   Composite Reaction Factors	Job Bolt, Washer, and Hole   Bolt Settings   Bolt Specifications   Nut and Washer Settings   Washer Settings   User Slot Lengths
Job Material Grades   Angle Grades   Cruciform Grades   Channel Grades   Flat Bar Grades   Grating Grades   HSS / TS Production Standards   HHS / TS Grades   Pipe Grades   Plate Grades   Rebar Grades   Round and Square Bar Grades   Shear and Threaded Stud Grades   Turnbuckle / Clevis / Pin Grades   Wide Flange Grades   WT Grades	Job Modeling   Material Usage Descriptions   Member Revisions   Member, Material, Bolt and Weld Colors   Predefined Colors   Event Logging ( enabled )   Member and Drawing Restrictions   Terrain ( enabled )   Predefined Note Tags   Member Pins   Job North   Site Location   Import Model Offset   Zone and Sequence   Joist Manufacturers	Job Custom Properties   Activate Custom Properties    * ( enabled )   Job Properties    ** ( enabled )   Member Properties    ** ( enabled )   Material Properties    ** ( enabled )   Hole Properties    ** ( enabled )   Bolt Properties    ** ( enabled )    * If modular    ** These open the same window -- Edit Schema -- but get different lists of schema entries. Job Plugin Defaults   Command   Component   Member

Job Concrete   Concrete Strength    *   Concrete Finishes    *   Concrete Cover Surfaces   CMU Templates   Thickened Slab Templates   Concrete Column Templates   Concrete Beam Templates   Grade Beam Templates   Continuous Footing Templates  Footing Step Templates   Pilaster Templates

Job Rebar   Concrete Reinforcement Defaults   Rebar Grades   Rebar Definitions   Rebar Coatings   Rebar Specifications   Rebar Usage Descriptions   Standard Rebar Bends

page 1 | contents | home > project settings > | top