The [Legacy] Miscellaneous Member Review window ( Modeling ) (read-only)

The " Status " and " Properties " buttons on this window can be used to open other windows that are fully editable .

• To open this window:
  
  
  • Review
  • Review by Piecemark
  • Review by Member Number
  • Double-click on member main material in Select mode
  • "Review..." on context menu, select member piecemark
• The [Legacy] Miscellaneous Member Review window does not provide material settings. To open the member's material window:
  
  
  • Hover the material in the model > right-click ( Menu ) > choose " Review Other " on the context menu.
• Legacy miscellaneous members are members of various material types which the user of a full-featured SDS2 program has added to the 3D model by designating two or more points.
• The orientation of these points with respect to the view in which the miscellaneous member was added sets the default orientation for the main view of the member on its member detail. Users of a full-featured SDS2 program can change this default orientation by changing the main view in member isolation .

Also see :

• Review Material (to get material specifications)
• Update Attributes (for sequence/status changes)

page 1 | contents | review | top

---

------ General settings ------

Piecemark or System piecemark or User piecemark or Frozen piecemark

Piecemark group

Sequence

Left/Right end standard detail: None or a standard detail name .

If ' none ' is entered here, then no standard detail will be applied on this end of the miscellaneous member when it is automatically detailed in a full-featured SDS2 program .

If a ' standard detail name ' is entered here, the next time auto detailing this miscellaneous member takes place, the reference point of the standard detail will align with the input work point on this end of the member, and the standard detail's bill of material will be combined with the member's bill of material. The detail is placed on a layer that is named after the standard detail plus a "_L" or "_R" suffix.

Galvanized

Marked for detailing

Model complete date

page 1 | contents | review | top

---

   

"Properties" opens the Edit Properties window, on which you can make entries to custom properties . The Edit Properties window can also be used to read " Log " entries or review or type " Notes ." If, at the time it was created, your current Job was set to use a legacy flavor, the window that opens is named Custom Properties , not Edit Properties .

" Status " opens the Member Status Review window for the miscellaneous member(s) that you are reviewing. You can use that window to update status information about the miscellaneous member(s).

" OK " (or the Enter key) closes the Miscellaneous Member Review window (this window) and saves to the member file(s) any changes made on the Member Status Review window.

Change all: If you double-clicked a miscellaneous member and made a change to its status and the 3D model contains other miscellaneous members with the same piecemark, a yes-no dialog opens after you press " OK ." On that yes-no dialog is the question, " Do you want to change all .... " Press the " Yes " button to update the status of all the members with this same piecemark; press the " No " button to change only this one member.

" Cancel " (or the Esc key) closes this window without saving any status changes made on the Member Status Review window.

" Reset " undoes all status changes you made to this member on the Member Status Review window.

page 1 | contents | review | top