Shop Bolt Summary From Sheet BOM (data from member bill of material)
Tool summary :
- Outputs a report that summarizes, on each line, the quantity of shop bolts per bolt description / length / remarks. You can select multiple detail sheets to be included in the report.
- Shown below is an example of a complete Shop Bolt Summary From Sheet BOM .
This single page lists all of the shop bolts needed to fabricate the members whose details were placed on the sheets selected for inclusion in the report. - The counts of shop bolts for members on sheets for which " List in bill of material " is not checked (
) are excluded from the report.
- See columns on the report for an explanation of each of the columns that appear on this report. Also on this help page are step-by-step instructions .
Also see :
- Shop bolts ( Bolt Edit window > " Bolt class " )
- List in bill of material (turns on/off the reporting of bill data)
- Reports ( User and Site Options > Output > " Reports " > set report output)
- Report viewer (a good way to output a report)
home > reports > system reports > shop bolts > | reports > shop bolts >
Columns on the report (also see the example ) :
Line: The number of the line in this report that is assigned to this group of shop bolts described in that line. Each group of bolts with unique specifications (description, length, etc.) is on a different line.
Count: The total number of shop bolts on this line.
Report Writer: BilllOfMaterial.TotalQuantity
Description: The diameter and material grade of the shop bolts on this line. This column also includes the bolt type if ' Bolt material & type ' is selected for the setup option " Bolt designation shown in reports .
| diameter |
|
Report Writer: BilllOfMaterial.Description
Length: The distance from the inside of the bolt head to the end of the shaft. Head thickness is not included in the calculation of bolt length because head thickness may vary among bolt manufacturers.
| length |
|
Report Writer: BilllOfMaterial.LengthDimension
Remarks: The number and type ( HD or PL or RPL or FL or BVL or DTI or HLS ) of washers on each shop bolt in this group of shop bolts.
| hardened
(HD) |
square
plate (PL) |
round
plate (RPL) |
flat
(FL) |
bevel
(BVL) |
load
(LD) |
hillside
(HLS) |
|
|
|
|
|
|
|
Report Writer: BilllOfMaterial.Remarks
home > reports > system reports > shop bolts > | reports > shop bolts > | top
How to output a Shop Bolt Summary From Sheet BOM :
A Shop Bolt Summary From Sheet BOM may be used to evaluate the quantity, type and length of shop bolts that are needed to fabricate all members on the sheets selected for inclusion in the report.
1 . Before output of this report:
1a : A Shop Bolt Summary From Sheet BOM may be generated after placing details onto detail sheets. Be aware that the report counts all shop bolts of those members on selected sheets which have " List in bill of material " checked. This means that if the same member is on the same sheet twice and " List in bill of material " is checked for both members, the report doubles the shop bolt count -- which is probably not what you want. The report also doubles the shop bolt count if a member is on two selected sheets and " List in bill of material " is checked for both.
2 . Use any one (1) of the following methods to begin printing this report:
Method 1 : Home > Reports > System Reports > Shop Bolts > Shop Bolt Summary From Sheet BOM .
Method 2 : Click the Shop Bolt Summary From Sheet BOM icon. The icon can be taken from the group named ' Reports ' and placed on a toolbar (classic) or the ribbon (lightning). Ribbon configuration is done using Customize Interface .
Method 3 : If " Modeling layout style " or " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Reports > Shop Bolts > Shop Bolt Summary From Sheet BOM.
3 . A selection dialog opens. On it is a selection list of the detail sheets in your current Job.
|
You can optionally press the button under " Destination " to redirect the output of the report. In this example, " Screen " indicates that output is to the report viewer . |
DS_1
Tip: A Sheet List by Sheet can help you select which sheets you want.
Method 1 : Home > Reports > System Reports > Shop Bolts > Shop Bolt Summary From Sheet BOM .
Method 2 : Click the Shop Bolt Summary From Sheet BOM icon. The icon can be taken from the group named ' Reports ' and placed on a toolbar (classic) or the ribbon (lightning). Ribbon configuration is done using Customize Interface .
Method 3 : If " Modeling layout style " or " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Reports > Shop Bolts > Shop Bolt Summary From Sheet BOM.
4 . The Shop Bolt Summary From Sheet BOM is output.
Note: If you output the report to the report viewer (" Screen "), you can now review the report on screen then optionally print it or output it to disk (see report viewer ).
home > reports > system reports > shop bolts > | reports > shop bolts > | top