" 
Gusset 2 Point " & " Weld Conn2 " connection design locks
|
NS and FS web plates shop bolt to a stem-vertical W tee vertical brace and field bolt to a shared gusset plate for 2-point bracing (" |
|
||||||
| " Gusset 2 Point "
(gusset plate dimensions and location)  |
" Weld Conn2 "
(" Gusset to supporting member " = ' Welded ')  |
|||||
|
||||||
User Defined Connections: Settings that are locked (
) in the user defined connection file will automatically be locked on the member edit window. You can, if you so choose, manually lock additional settings on the member edit window, and your changes will be retained, through multiple processes, so long as you do not change to a different connection then switch back to the original user defined connection.
Vertical Brace Edit: To change a setting, first set it to locked (
) may be updated, and the "
user defined | vertical brace edit | top
Connection design locks :
| Locks not dimensioned or called out on the drawing are marked ( not depicted ). |
Gusset 2 Point
( stem-vertical W tee vertical braces, web plates, to a beam )
Gusset 2 Point
Plate thickness ( not depicted ): The " Material thickness " of the gusset plate.
Width ( plate width ): The distance (perpendicular to the work line of the supporting beam) from the framing edge of the gusset plate (the edge that welds to the beam in the example shown) to the opposite edge of the gusset plate (which is parallel with the framing edge of the gusset plate).
Length ( plate length ): The length of the framing edge of the gusset plate (which welds to the supporting beam in the example shown). The gusset plate " Length " is measured parallel with the work line of the supporting beam.
Refy: The positive (+) or negative (-) distance (perpendicular to the supporting beam's work line ) from the work point of the vertical brace to the framing edge of the gusset plate (which welds to the beam's bottom flange in the example shown). For a shared gusset to a non-sloping beam, this distance is vertical. Changing the " Refy " moves the gusset plate perpendicular to the work line of the beam, but does not move the holes on the plate.
Left Brace [ member number ]
Refx: The positive (+) or negative (-) distance (parallel with the supporting beam's work line ) from the work point of the left vertical brace to the corner of the framing edge of the gusset plate that is closest to the left end of the beam (see example ). For a shared gusset plate to a non-sloping beam, this distance is horizontal. Changing the " Refx " moves the gusset plate parallel with the work line of the beam, but does not move the holes on the plate. Hole positioning is governed by the "
Connection cut width ( cut width ): The distance (perpendicular to the work line of the supporting beam) between the two corners of the connection edge of the gusset plate. The connection edge is the edge that the left stem-vertical tee brace connects to with web plates (see example ). This distance is not the actual length of the connection edge, but the length of that edge as measured parallel with the depth of the beam.
Connection cut length ( cut length ): The distance (parallel with the work line of the supporting beam) between the two corners of the connection edge of the gusset plate. The connection edge is the edge that the stem-vertical tee brace connects to with web plates (see example ). This distance is not the actual length of the connection edge, but the length of that edge as measured parallel with the framing edge of the gusset plate -- that is, parallel with the beam.
Refx: The positive (+) or negative (-) distance (parallel with the supporting beam's work line ) from the work point of the right vertical brace to the corner of the gusset plate's framing edge that is closest to the right end of the beam. This works similar to the way that " Refx " works for the left vertical brace.
Connection cut width ( cut width ): Same as " Connection cut width " for the left brace, except that this applies to the right brace.
Connection cut length ( cut length ): Same as " Connection cut length " for the left brace, except that this applies to the right brace.
user defined | vertical brace edit | top
Weld Conn2
( stem-vertical W tee vertical braces, 2- or 3-point, to a beam )
Shop weld, gusset to the supporting beam
Weld size ( weld ): The weld size for shop welding the gusset plate to the supporting beam (see example ). Gusset plates for 2-point bracing can optionally be shop-bolted to the beam with a clip angle ("
To get a weld ("
To instead get a clip angle ("