Bolt Mode ( Drawing Editor )

Tool summary :

  • Lets you invoke -- via your mouse -- commands for adding, modifying, or deleting 2D bolts.
  • Modes can be reconfigured by users in Mode Configuration . This documentation explains the defaults for this mode.
  • To activate Bolt Mode :
    • Method 1 : Click the Bolt Mode icon. The icon can be taken from the group named ' Objects -- Bolts ' and placed on a toolbar (classic) or the ribbon (lightning).

    • Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Objects > Bolts > Bolt Mode .

    • Method 3, 4 or 5 : Bolt Mode can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface .

    • Note: If you have nested this mode inside another mode using Mode Configuration , you can invoke this mode's mouse bindings from within that other mode by clicking the appropriate mouse button. To bring back the mouse bindings of the original mode, use Mode Return (or Esc ).
  • 3-button mouse bindings with scroll wheel:

    no key pressed
    Add
    Edit Erase

  • If you find yourself stuck while executing a command and want to bring back the original mouse bindings, click the mouse button for Return (usually right-click). If Return is not shown on the mouse binding reporter, press Esc to execute Mode Return .
  • For example, Bolt Add brings you into a loop for repeating the command over again -- right-click ( Return ) when you are done adding 2D bolts.

Also see :

page 1 | contents | objects > bolts > | modes | bolts | top

.