Settings on material windows for Add [Legacy] Miscellaneous Member
To open a material window with these options :
Material windows these settings can appear on :
------ Miscellaneous member settings ------
| These options appear on the material window for Add Legacy Miscellaneous Member operations only. After the member has been added, these settings appear on the [Legacy] Miscellaneous Member Edit window. |
Member sequence: Any sequence name from Home > Project Settings > Job > Zone and Sequence > press " Sequence Names " > Sequence Names . The sequence assigned by default to the first legacy miscellaneous member added after you first start up Modeling is the sequence listed in line 1 of the Sequence Names list. For each subsequently added legacy miscellaneous member during the same session in Modeling , the default sequence is whatever sequence was assigned to the previously added legacy miscellaneous member.
To assign a sequence, you can type in any sequence name on the Sequence Names list, or you can press the "file cabinet" browse button (
) and double-click any sequence name that is on the list.
Report Writer: Member.ErectionSequence
Report Writer: Member.ErectionZone (the " Member sequence " sets the zone).
Advanced Selection: ErectionSequence
Advanced Selection: ErectionZone
Parametric module: ErectionSequence
Parametric module: ErectionZoneAlso see: The [Legacy} Miscellaneous Member Edit window. Dividing a model into sequences/zones .
opens the Status Review window.
You can use that window to enter status information or the " Member description " that you want applied to this legacy miscellaneous member.
Left/Right end standard detail: None or a standard detail name . To apply a standard detail, you can type in the file name of the drawing (if you know it), or press the "file cabinet" browse button ( ) and double-click any job standard detail or global standard detail that is on the list.
If ' none ' is entered here, then no standard detail will be applied on this end of the legacy miscellaneous member when it is automatically detailed .
If a ' standard detail name ' is entered here, the next time you auto detail this legacy miscellaneous member, the reference point of the standard detail will align with the input work point on this end of the member, and the standard detail's bill of material will be combined with the member's bill of material. The detail is placed on a layer that is named after the standard detail plus a " _L " or " _R " suffix.
Report Writer: Member.LeftEnd.MoreEnd.StandardDetailFileType
Report Writer: Member.LeftEnd.MoreEnd.StandardDetailFileNumber
Report Writer: Member.LeftEnd.MoreEnd.StandardDetailFileNameAdvanced Selection: m.Ends[0].StandardDetailFileNumber
Advanced Selection: m.Ends[0].StandardDetailFileTypeParametric module: m.Ends[0].StandardDetailFileNumber
Parametric module: m.Ends[0].StandardDetailFileType