" 
Brace Connection To Gusset " connection design locks
|
A stem-vertical W tee vertical brace field bolts to its gusset plate per choices made to " |
|
|||
| " Brace Connection To Gusset "
(hole pattern for field bolts )  |
|
||
User Defined Connections: Settings that are locked (
) in the user defined connection file will automatically be locked on the member edit window. You can, if you so choose, manually lock additional settings on the member edit window, and your changes will be retained, through multiple processes, so long as you do not change to a different connection then switch back to the original user defined connection.
Vertical Brace Edit: To change a setting, first set it to locked (
) may be updated, and the "
VIDEO 
A stem-vertical W tee vertical brace has its " Connection type " set to ' Coped flange ' and its " Side of gusset " set to ' Near side ' then to ' Far side '.
user defined | vertical brace edit | top
Connection design locks :
| Locks not dimensioned or called out on the drawing are marked ( not depicted ). |
Brace Connection To Gusset
( stem-vertical W tee vertical brace, coped flange, to a beam & column )
Bolt diameter ( not depicted ): You can either type in any diameter (inches or mm), or you can select a bolt diameter from the combo box (
). The diameters that are listed in the combo box come from Home > Project Settings > Job > Bolt Settings > the " Available bolt diameters " list. The bolt diameter entered here, together with the " Hole type " entered below, set the diameter of holes through the gusset plate and the stem-vertical tee brace.
Hole type ( not depicted ): Standard round or Short slot or Oversized or Long slot . The hole type selected here, together with the " Bolt diameter " entered above, set the diameter of holes for field bolting the brace to the gusset plate.
Rows: The total number of holes in any column of holes in the vertical brace gusset plate (see example ). Bolt rows on a vertical brace gusset plate run perpendicular to the work line of the vertical brace. For the stem-vertical tee brace shown in the example above, the number of " Rows " is ' 2 '.
Distance to 1st hole along brace ( to 1st hole ): The distance (parallel with the work line of the vertical brace) from the work point for this end of the vertical brace to the center of the nearest hole in the gusset plate (see example ).
Hole spacing along brace ( row spacing ): The distance (center to center) between of any two adjacent holes in the same column of holes in the gusset plate (see example ).
End connection failure message: Invalid bolt spacing
Edge distance along brace ( edge distance ): This distance (parallel with the work line of the brace) from the edge of the W tee brace that is nearest to the work point to the row of holes that is nearest to that edge (see example ).
Other edge distance along brace ( other edge distance ): The distance (parallel with the work line of the brace) from the edge of the gusset plate to the nearest hole for bolting the vertical brace to the gusset plate (see example ). The edge of the gusset plate referred to here is the edge that the vertical brace frames to.
Columns: The number of columns of holes in the gusset plate (see example ). These holes are for field bolting the stem-vertical tee brace to the gusset. In the example above, the number of " Columns " is ' 2 '.
Hole spacing perpendicular to brace ( colsp ): The distance (center to center) between any two columns of holes (see example ). Bolt column spacing runs perpendicular to the work line of the vertical brace.