Restore Selection ( Modeling & Drawing Editor )

Tool summary :

• Restores the previous selection if you have cleared that selection or made a different selection.
• For example, restore selection can restore a selection that you lost or altered by selecting a different item, or by selecting additional items ( Select+ ), or by deselecting from the selection ( Select- ), or by left-clicking ( Select ) in space, or by doing a Clear Selection .
• Restore Selection can be used in Select Items mode in Modeling or in the Drawing Editor .
• See the step-by-step instructions .

Also see :

• Modeling and the Drawing Editor (where Restore Selection is a tool)
• Select Items Mode ( Restore Selection in Modeling )
• Select Items Mode ( Restore Selection in Drawing Editor )
• Selection count (shows results of Restore Selection )
• Clear Selection (a related tool)

Step-by-step instructions :

1 . Invoke Restore Selection using any one (1) of the following methods:

▸ Click the Restore Selection icon, which is pictured above. The icon can be taken from the group named ' Selection ' ( Modeling ) or ' Selection ' ( Drawing Editor ) and placed on the ribbon.

▸ Restore Selection can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface . The default context menu is configured to allow you to right-click ( Menu ) and choose " Restore Selection " whenever a previous selection has been cleared.

2 . The previously selected item(s) are selected again. To indicate that they are selected, Restore Selection displays the items in a color other than their normal color (in Modeling , the " Primary selection color "). If an item not included in the selection was selected before step 1, that item is now deselected.