Member Sequence Mode ( Modeling )

Tool summary :

• Lets you invoke -- via your mouse -- commands for reviewing and modifying member sequences.
• Modes can be reconfigured by users in Mode Configuration . This documentation explains the defaults for this mode.
• To activate Member Sequence Mode :
  

  • Method 1 : Click the Member Sequence Mode icon. The icon can be taken from the group named ' Model -- Member ' and placed on a toolbar (classic) or the ribbon (lightning).

  • Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose Model > Member > Sequence > Member Sequence Mode .

  • Method 3, 4 or 5 : Member Sequence Mode can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface .

  • Note: If you have nested this mode inside another mode using Mode Configuration , you can invoke this mode's mouse bindings from within that other mode by clicking the appropriate mouse button. To bring back the mouse bindings of the original mode, use Mode Return (or Esc ).
• 3-button mouse bindings with scroll wheel:
  
  

  no key pressed

  Repeat Set Show

  
  
  • Left-click ( Set ) invokes Set Sequence .
  • Middle-click ( Repeat ) invokes Repeat Sequence .
  • Right-click ( Show ) invokes Show Sequence .
  • Scroll up invokes Zoom In to Pointer .
  • Scroll down invokes Zoom Out to Pointer .
    
    

    Area

    Shift key pressed

  • Left-click ( Area ) invokes Move Member Sequence .
• If you find yourself stuck while executing a command and want to bring back the original mouse bindings, click the mouse button for Return (usually right-click). If Return is not shown on the mouse binding reporter, press Esc to execute Mode Return .

Also see :

• Modes (topic)
• Select Items (base mode in Modeling )
• Mode Configuration (to configure a mode)
• Clear Mode Stack (to go directly back to the base mode)
• Mouse button binding reporter (shows mouse button to press)
• Mode Return (or press Esc to go back to base mode or previous mode)
• Mouse buttons ( User and Site Options -- sets number of mouse bindings)
• Revision Level, Zone and Sequence ( Job Preferences )
• Break major marks apart by sequence ( Member Piecemarking )
• Break major marks apart by zone ( Member Piecemarking )
• Update Attributes (can be used to assign sequences)
• General Status Options (can be used to assign sequences)
• Dividing a Model into Sequences/Zones (overview)

page 1 | contents | model > member > sequence > | modes | top

.