Solids Mode (for Detail Evus using the ' Manual ' method)

Tool summary :

  • Lets you invoke -- via your mouse -- commands for changing the manual erection view detailing member style to stick, solid opaque, solid + wire and others.
  • Modes can be reconfigured by users in Mode Configuration . This documentation explains the defaults for this mode.
  • To activate Solids Mode :
    • Method 1 : Click the Solids Mode icon. The icon can be taken from the group named ' View -- Solids Mode ' and placed on a toolbar (classic) or the ribbon (lightning).

    • Method 2 : If " Modeling layout style " is ' Classic ', you can use the menu system to choose View > Solids Mode .

    • Method 3, 4 or 5 : Surface Mode can also be configured to be invoked using a keyboard shortcut , the context menu , or a mode . For the lightning interface, this configuration is done using Customize Interface .

    • Note: If you have nested this mode inside another mode using Mode Configuration , you can invoke this mode's mouse bindings from within that other mode by clicking the appropriate mouse button. To bring back the mouse bindings of the original mode, use Mode Return (or Esc ).
  • 3-button mouse bindings:

    no key pressed
    Stick
    Wire Solid

  • If you find yourself stuck while executing a command and want to bring back the original mouse bindings, click the mouse button for Return (usually right-click). If Return is not shown on the mouse binding reporter, press Esc to execute Mode Return .

Also see :

manual evu detailing steps | manual evu detailing environment | solid > | solids | top

.