The Plate Report window

  • Check the boxes for the types of materials you want to include in the Plate Report by Thickness or Plate Report by Hole Size that you are generating. For example, if you are using the report for bent plates only, you should check only the box for " Bent plate ."

To open this window :

  • Output a Plate Report by Thickness
  • Output a Plate Report by Hole Size

page 1 | contents | home > reports > system > | reports > plate report > | top


------ Settings ------

Rectangular plate: or .

If this box is checked ( ), then rectangular plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All rectangular plates in your current Job will be included in the report, and the header on each page of the report will note that this type of plate is included.

If the box is not checked ( ), rectangular plate will not be included in the report.

Note: Connection design automatically generates rectangular plates for end plate and shear connections, beam seats , beam splices , column splices , auto base/cap plates , top/bottom moment plates and user base/cap plates . Rectangular plates added using the Rectangular Plate Add or Miscellaneous - Rectangular Plate are also be included in the report when this box is checked.

Round plate: or .

If this box is checked ( ), then round plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All round plates in your current Job will be included in the report, and the header on each page of the report will note that this type of plate is included.

If the box is not checked ( ), round plate will not be included in the report.

Note: Round plate can be added using Round Plate Add or Miscellaneous - Round Plate .

Bent plate: or .

If this box is checked ( ), then single-bend plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All bent plates in your current Job will be included in the report, and the header of each page of the report will note that this type of plate is included.

If the box is not checked ( ), bent plate will not be included in the report.

Note: Connection design automatically generates bent plate for bent plate connections. You can also add bent plates using Bent Plate Add or Miscellaneous - Bent Plate .

Rolled plate: or .

If this box is checked ( ), then rolled plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All rolled plates in your current Job will be included in the report, and the header of each page of the report will note that this type of plate has been included.

If the box is not checked ( ), rolled plate will not be included in the report.

Note: Rolled plate can be added using Rolled Plate Add or Miscellaneous - Rolled Plate .

Flat plate layout: or .

If this box is checked ( ), then multi-sided flat plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All flat plate layouts in your current Job will be included in the report, and the header of each page of the report will note that this type of plate is included.

If the box is not checked ( ), flat plate layouts will not be included in the report.

Note: Multi-sided flat plate can be added using Flat Plate Layout or Miscellaneous - Flat Plate Layout .

Bent plate layout: or .

If this box is checked ( ), then multi-bend plate is selected for inclusion in the Plate Report by Thickness or Plate Report by Hole Size . All bent plate layouts in your current Job will be included in the report, and the header of each page of the report will note that this type of plate is included.

If the box is not checked ( ), bent plate layouts will not be included in the report.

Note: Multi-bend plate can be added using Bent Plate Layout or Miscellaneous - Bent Plate Layout .

page 1 | contents | home > reports > system > | reports > plate report > | top


To close the Plate Report window :

"OK" (or the Enter key) closes this window and opens the Output Configuration window so that you can complete the generation of the Plate Report by Thickness or Plate Report by Hole Size .

After you select (on the Output Configuration window) the location/device to which you want the report to be output, the report is generated, and it will include the plate types that you selected on this window so long as members that incorporate those plate types exist in your current Job and have been Detailed .

"Cancel" (or the Esc key or the button) closes the Plate Report window and cancels the output of the Plate Report by Thickness or Plate Report by Hole Size .

"Reset" undoes all changes made to this window since you first opened it. The window remains open.

page 1 | contents | home > reports > system > | reports > plate report > | top